Thanks a Lot Ronghua Fan, Note 1449168 fixed the issue. Assinged you full points.

Thanks again for your quick response which helped in fixing the issue appreciated.

Regards

Aravind

We want to run a statistical sales forecast for 10,000 products using a HANA SQL procedure calling a PAL time series statistical function

We are using the classic BPC models (for various reasons including requiring the standard BPC comments functionality) and callout of to HANA procedures to run the statistical forecast natively in HANA and write to a HANA table.  So you can think of it as a HANA SQL procedure using PAL time series functions (double exponential)

We are forecasting 10,000 products with 3 years worth of history (36 monthly data points) and forecasting out 3 years (36 monthly data points).  The problem is the BFL/PAL functions only allow us to run the function for one product at a time.  HANA is not very efficient at looping though data, we are suppose to avoid loops.  If each run of the forecast takes 2 seconds to read, calculate the write the data that is a total 5.55 hours.  We have not been able to find a way to force HANA to run the statistical forecasts in parallel.  If we could run 120 in parallel it would take 2.77 minutes.

Is there a way to run BFL/PAL statistical functions in parallel for a large data set for multiple ‘products'.  Everything we have found is calling it with one ‘ product’ at a time  We have looked at S&OP on HANA code but could not work out how it is doing statistical forecasts, we expect this would have been solved with S&OP on HANA.

As a backup we have configured the old BW-IP statistical forecasting functions.  This runs for the whole data set at once and takes about 15 mins, a lot faster than the new HANA based PAL functions.  This is a potential work around but not ideal.

Hi!

It would be great to have easy way to share SAP Certification on LinkedIn via Add to Profile for Certifications and Education | LinkedIn

It can be an e-mail with this button after SAP certificate issue.

Hi!

It would be great to have easy way to share OpenSAP courses Records of achievement on LinkedIn via Add to Profile for Certifications and Education | LinkedIn

It can be an e-mail with this button after Recors of achievement issue.

Unfortunately there is very little information available in your post to assist you. If you were able to upgrade the sandbox and development without any issues then check if all the systems in the landscape are consistent (kernel level, client libraries and DB version / patch level) and if they are then check with SAP support.

Good Luck

RB

Yes, that's why I added it. No need for other readers to look at the note when it's so tiny.

Hi Dipak,

SAP Event Management drives separately to set the status attributes based on Event Handler Creation, Update and Event Message.  There are standard activity methods STATUS_CHECK and STATUS_SET delivered by SAP.  STATUS_CHECK is used to check status of status attributes and STATUS_SET is used to set the statuses like Loaded, Arrived, Shipped, Departed, Collected etc.

You can create your own statuses and set statuses based on your configuration on following areas:

Updating Event Handlers - IMG -> Event Management -> Event Handlers and Event Handler Data -> Event Handlers -> Define Activities for Updating Event Handlers

Expected Event Monitor - IMG -> Event Management -> Event Handlers and Event Handler Data -> Expected Events -> Define Activities for the Expected Event Monitor

Ruleset- IMG -> Event Management -> Reaction to Event Messages -> Define Rule Sets

Let us know if you need more information.

Regards

GGOPII

Hello,

TS900000003 should be of type BOR DECISION Method PROCESS. General assignment is maintained correctly.

Create a background task of type BOR FIPP and method POST after approval step in ' APPROVED' outcome . WF-BATCH will post the document.

You are trying to post at the time at the time of approval.

Regards

Sandy

Hi Michal,

When you say "my log backup is empty regardless of keep/remove use" do you mean MaxDB is not performing the Autolog backups regardless the AUTOLOG_SHOW result being AUTOSAVE IS ON (there is no log backups in the directory of your autolog backups?)

Or do you mean that Symantec NetBackup is not archiving the LOG backup files?

I may suggest to:

1) Check again the Backup template for your AutoLog backup (output directory/file);

2) Check the files dbm.prt and dbm.ebl (external backup log) for additional information.

3) Revisit the archive_stage documentation http://maxdb.sap.com/doc/7_8/45/3f1ce4119d4e689f12dd81abd9e375/content.htm

Regards,

Luis Darui

Hi Zenon,

When you consider this approach we have to think twice whether you can apply this design.  Because Event Message BAPI doesn't hold few things like Application object ID, Acknowledgement data etc

The following table provides an overview of which data you can add, change, or delete through BAPI event message only, so if you are expecting anything on event handler BAPI, then you need to incorporate into the BAPI message.

Again, if you have custom BADI /SAPTRX/BADI_EH_S called on your EH_POST then you need to consider on your design,

This approach quite tricky and cumbersome work.  When you do SAP EM upgrade then need to check any new methods implemented and called in EH_POST by SAP, then you need to implement in your new BAPI message design.

I have always request customer to leave the standard SAP designs (Can call both EH POST and EM Message) and copy and make custom on according to their requirements.  Because down the line, it will cost TCO on customer side if we break the standard changes.

Regards

GGOPII

Hi S,

from your question you are saying you want to map all those nodes with the same member IDs?

what do you mean by node A, B, C?

If you replace XXXX with only A then of course you will be getting duplicates as you have 3 similar IDs to start with.

Please tell us what your final results should look like.

Andy

Hi Marcal,

Did you manage to get anywhere with this? We currently have the same requirement with the Functional Location search which you mentioned earlier.

Bill - Have the been any changes in the SDK that allows for Wildcard / Contains searches on Complex Tables?

Thanks,

Stephen

Hi Marco

You are saying that the system is recognizing these in the CCR and transferring afte rpush from CCR. CCR does not recognize the discrepancy if there is no active integration model. Second, push from CCR is working, so the integration model is active- another proof.

There are no CIF blocks, so that means the system is not prompting a push or the publication settings are in such a way that they system thinks there is nothing wrong with CIF.

"In SPRO  "Mantain Object Specific Settins" is "Only Retransfer After OnLine Transfer": in production enviroment there is the same setting and all is working correctly."

Did you compare the publication settings maintained in your production and ESM systems? Make sure the order types you are checking are not setup in publication settings as "immediate transfer" or "Only Retransfer After OnLine Trasnsfer".

These settings are separately done in each of the instances.

One final thing I can suggest ( I don't think would be the reason but just checking) is to see if more than one integration model is active in ECM for the same order type and selection.

Hope this helps.

you can check here http://help.sap.com/hr_integration/ we have listed all the iflows Are you also referring to SF to SAP for payroll? ie Time, Org and Pay related ones?

Hi

I want to create a tirgger point . Here is the scenario.

I have a production order with 5 operation. When my first operation of order gets a fully confirmed status then my second operation should be released. Once I fully confirm second operation , my third operation need to be released and so on.

Can you please give me a step by step procedure that I need to follow to set the system working as said above.

Thank you

Regards

Thomas

Hi

Please can anyone throw light on how to read internal table in JS? All i have is:

in the above code i want to read the table based on the index 'J' from the JS for loop and also set the actvty variable in the JS? any pointers here please?

How to pass input box values from one view to next view in Sapui5 ? please assist me.

Hi Hari,

As I have mentioned in my 1st post, extended notification is the SAP recommended way to send the emails for pending workitems.

If your business requirement is just to notify the user and not trigger any workflow/action items to users then you can use the Userexit/BADI to trigger the email programatically. But if the users have pending action items then extended notifications is the best way to send reminder emails.You can use userexits/custom reports to send emails for pending items but it is an overkill.

Regards

Sandy

Hi,

I'm trying to install SQL on my windows server but i'm having this error when I execute SQL4SAP.log script:

The unattended installation failed.

The unattended installation failed.

  Installation Step: The unattended installation failed.

  Return Code: -2067529714

  Log File: C:\Windows\SQL4SAP.log

Check the log file above.

See SAP note 1144459 for known issues.

Result: vbOK

I've checked the note and deactivated the User Account Control in the server but it continues failing.

This is the log generated for the installation:

******************************************************

* Customized installation of SQL Server 2008R2 for SAP *

******************************************************

Log File: C:\Windows\SQL4SAP.log

Script started 3/30/2015 2:17:46 AM on HO-P-SPRT01

----------------------------------------

System settings:

  Win32_Processor.Name=Intel(R) Xeon(R) CPU           E5502  @ 1.87GHz

  Win32_Processor.NumberOfCores=2

  Win32_Processor.NumberOfLogicalProcessors=2

  Win32_ComputerSystem.SystemType=x64-based PC

  Win32_ComputerSystem.NumberOfProcessors=1

  Win32_ComputerSystem.NumberOfLogicalProcessors=2

  Win32_OperatingSystem.OSType=18

  Win32_OperatingSystem.Version=6.1.7601

  Win32_OperatingSystem.ServicePackMajorVersion=1

  Win32_OperatingSystem.Caption=Microsoft Windows Server 2008 R2 Standard

  Win32_OperatingSystem.ProductType=3

  Win32_OperatingSystem.OSProductSuite=272

  Win32_OperatingSystem.OSLanguage=1033

----------------------------------------

Service Accounts:

  OSSystemAccount   = NT AUTHORITY\SYSTEM

  OSLocalSrvAccount = NT AUTHORITY\LOCAL SERVICE

  OSNwSrvAccount    = NT AUTHORITY\NETWORK SERVICE

----------------------------------------

Computer name in Registry:

  ActiveComputername= HO-P-SPRT01

  Computername      = HO-P-SPRT01

  Hostname          = HO-P-SPRT01

----------------------------------------

Windows version:

  OSVersion         = 6.1

  OSFamily          = Windows2008R2

  OSServicePack     = 1

  OSEdition         = Server

  OSSystemType      = X64

  OSProductSuite    = Terminal Server

  OSMsiVersion      = 5.0.7601.18493

  OSMdacVersion     = 6.1.7601.17514

  OSLanguage        = English – United States

  OSLanguageID      = 1033

  OSLogicalProcessors=2

  OSTime            = 20150330021747.477000+120

  OSBootTime        = 20150330014012.375199+120

----------------------------------------

Environment on HO-P-SPRT01:

  userDir           = C:\Users\BeatrizV\

  tmpDir            = C:\Users\BeatrizV\AppData\Local\Temp\2\

  rootDir           = C:\Windows\

  prgDir            = C:\Program Files\

  prgDirX86         = C:\Program Files (x86)\

----------------------------------------

SQL4SAP version:

  version:          ' v3.5.12   August 2011: SQL 2008 R2 SP1 CU1

  size:             163011

  created:          3/30/2015 1:30:18 AM

  modified:         11/2/2012 3:17:37 PM

  exe:              C:\Windows\System32\cscript.exe

  script:           C:\51044827\SQL4SAP.vbs

  C:                C:

----------------------------------------

Editions by folder:

  SeEditionPossible = False

  EeEditionPossible = True

  DeEditionPossible = False

----------------------------------------

DVD labels:

  v_10.50.2769_ent_2500_1600_ia64

  v_10.50.2769_ent_2500_1600__x64

  v_10.50.2769_ent_2500_1600__x86

----------------------------------------

Possible editions:

  SeEditionPossible = False

  EeEditionPossible = True

  DeEditionPossible = False

  SQLEditionInst    = 2008R2 Enterprise Edition

----------------------------------------

----------------------------------------

Script path:

  myRoot            = C:\51044827\

  myDir             = C:\51044827\x86-x64-IA64\

  myDirUNC          = C:\51044827\x86-x64-IA64\

----------------------------------------

Script settings:

  SqlAuthInstall    = False

  SilentInstall     = False

  SilentRtmSetup    = True

  FullInstall       = False

  isSlipstreamedCU  = True

  isSlipstreamedSP  = True

----------------------------------------

Installed .NET Framework:

  Microsoft .NET Framework 4 Client Profile

----------------------------------------

----------------------------------------

Installed SQL Server Instances:

----------------------------------------

3/30/2015 2:17:47 AM

----------------------------------------

Input Box "Select SQL Server 2008R2 instance"

No SQL Server instance was found.

======================================

SNAC 2008 R2 (SQL Native Client)    10.51.2769.0

Enter the new or existing name of a

64-bit SQL Server 2008R2 instance:

++++++++++++++++++++++++++++++++++++

+  for a Default Instance, enter:    (default)

+  for a Named Instance, enter:      <SID>

+  to install SQL Client Tools only, press Cancel.

++++++++++++++++++++++++++++++++++++

Result: SOL

----------------------------------------

3/30/2015 2:17:58 AM

----------------------------------------

Message Box "SAP recommendation"

SAP recommends that you install a Default Instance

Do you want to install a Default Instance of SQL Server

Result: vbYes

----------------------------------------

Registry settings (1/2):

----------------------------------------

HKLM\SOFTWARE\Microsoft\DataAccess\FullInstallVer

READ: 6.1.7601.17514

HKLM\SYSTEM\CurrentControlSet\Control\Computername\ActiveComputername\Computername

READ: HO-P-SPRT01

HKLM\SYSTEM\CurrentControlSet\Control\Computername\Computername\Computername

READ: HO-P-SPRT01

HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Hostname

READ: HO-P-SPRT01

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{3d06c673-5e8a-41c0-b47f-3c3ca0a22e67}

READ: 4

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{3d06c673-5e8a-41c0-b47f-3c3ca0a22e67}

WRITE(REG_DWORD): 4

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{319b29ae-7427-4fbc-9355-22df056c27a4}

READ: 4

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{319b29ae-7427-4fbc-9355-22df056c27a4}

WRITE(REG_DWORD): 4

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{2a0da30d-846f-4680-89da-2dbc457d7b44}

READ: 4

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{2a0da30d-846f-4680-89da-2dbc457d7b44}

WRITE(REG_DWORD): 4

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{2b9034f3-b661-4d36-a5ef-60ab5a711ace}

READ: 4

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{2b9034f3-b661-4d36-a5ef-60ab5a711ace}

WRITE(REG_DWORD): 4

HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{94DBD4EE-4C37-4C3F-995A-60995DFF112D}\DisplayName

READ: Microsoft SQL Server 2008 R2 Native Client

HKCR\Installer\Products\413B7F47705019F4A9E46B9C0B724E01\ProductName

READ: Microsoft SQL Server 2008 R2 Books Online

HKLM\Installer\Products\DFC90B5F2B0FFA63D84FD16F6BF37C4B\DisplayName

READ: Microsoft .NET Framework 4 Client Profile

HKCR\Installer\Products\EE4DBD4973C4F3C499A50699D5FF11D2\ProductName

READ: Microsoft SQL Server 2008 R2 Native Client

HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\100\Tools\ClientSetup\CurrentVersion\CurrentVersion

READ:

HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\100\Tools\ClientSetup\CurrentVersion\CSDVersion

READ:

HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\100\Tools\ClientSetup\CurrentVersion\CurrentVersion

READ:

HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\100\Tools\ClientSetup\CurrentVersion\CSDVersion

READ:

HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\90\Tools\ClientSetup\CurrentVersion\CurrentVersion

READ:

HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\90\Tools\ClientSetup\CurrentVersion\CSDVersion

READ:

HKLM\SOFTWARE\Microsoft\Microsoft SQL Server Native Client 10.0\CurrentVersion\Version

READ: 10.51.2769.0

HKLM\SOFTWARE\Microsoft\Microsoft SQL Server Native Client 10.0\CurrentVersion\PatchLevel

READ: 10.51.2769.0

HKLM\SOFTWARE\Microsoft\Microsoft SQL Server Native Client 10.0\CurrentVersion\Version

READ: 10.51.2769.0

HKLM\SOFTWARE\Microsoft\Microsoft SQL Server Native Client 10.0\CurrentVersion\PatchLevel

READ: 10.51.2769.0

HKLM\SOFTWARE\Microsoft\Microsoft SQL Native Client\CurrentVersion\Version

READ:

HKLM\SOFTWARE\Microsoft\Microsoft SQL Native Client\CurrentVersion\PatchLevel

READ:

----------------------------------------

3/30/2015 2:18:00 AM

----------------------------------------

Message Box "Confirmation"

You have chosen to install the new instance

SQL Instance:      (default)

SQL Version:       10.50.2769

SQL Edition:       2008R2 Enterprise Edition

SQL Collation:     SQL_Latin1_General_CP850_BIN2

Authentication:    Windows only

Login sa:          random password, login disabled

=====================================

The installation might take 15 minutes or longer

=====================================

Do you want to start the installation now?

Result: vbOK

----------------------------------------

3/30/2015 2:18:02 AM

----------------------------------------

Installing SQL Server 2008R2 Enterprise Edition on X64 - build 10.50.2769 ...

  Command:     "C:\51044827\x86-x64-IA64\EnterpriseEdition\setup.exe" /Q /ACTION=Install /IACCEPTSQLSERVERLICENSETERMS /PCUSource="C:\51044827\x86-x64-IA64\EnterpriseEdition\PCU" /CUSource="C:\51044827\x86-x64-IA64\EnterpriseEdition\CU" /Features=SQLEngine,Fulltext,Tools /INSTANCENAME=MSSQLServer /SQLCOLLATION=SQL_Latin1_General_CP850_BIN2 /AGTSVCSTARTUPTYPE=Automatic /SQLSVCACCOUNT="NT AUTHORITY\SYSTEM" /AGTSVCACCOUNT="NT AUTHORITY\SYSTEM" /TCPENABLED=1 /NPENABLED=1 /SQLSYSADMINACCOUNTS="BUILTIN\Administrators" /SAPWD=xxxxxxxxxxxxxxxx

  Return Code: -2067529714

  Log File:    C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\LOG\Summary.txt

----------------------------------------

3/30/2015 2:18:02 AM

----------------------------------------

Log file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\LOG\Summary.txt

----------------------------------------

3/30/2015 2:18:02 AM

----------------------------------------

Message Box "Installation failed"

The unattended installation failed.

  Installation Step: The unattended installation failed.

  Return Code:       -2067529714

  Log File:          C:\Windows\SQL4SAP.log

Check the log file above.

See SAP note 1144459 for known issues.

Result: vbOK

----------------------------------------

Registry settings (2/2):

----------------------------------------

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{3d06c673-5e8a-41c0-b47f-3c3ca0a22e67}

WRITE(REG_DWORD): 4

HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{2b9034f3-b661-4d36-a5ef-60ab5a711ace}

WRITE(REG_DWORD): 4

----------------------------------------

3/30/2015 2:18:09 AM

Quit script with return code 1

Do you have any idea what's happening?

Thanks thanks thanks thanks a lot, Sapera

Hi Durai, I show you two example:

JS Bin - Example 1

JS Bin - Example 2

Regards,

Pau