Quantcast
Channel: SCN: Message List
Viewing all 8713 articles
Browse latest View live

Work Flow Transport Impact

June 14, 2016, 3:28 pm
$
0
0

Dear Experts,

Kindly suggest impacts/notes associated if we do a PR work flow transport (transport from dev-> qlty -> prd) for the below issue.

 

Issue: In the current client SAP PR work flow (production system), there is difference in number range for the objects generated specifically with respect to “ID” (Tcode: PPOMW) in comparison to development and quality system.

For example the production system (Tcode: PPOMW) (Task Assignment- Column) 50009229 (ID – column) differs with respect to Qlty system (Tcode: PPOMW)  (Task Assignment- Column) 50008994 (ID – column) & in Dev system (Tcode: PPOMW) - no entry.

 

Now the client wants to create new id in the work flow and attach it to the MM PR release strategy and transport to the other systems.

 

Question:

1) Is position ID numbers considered as master data?. Any specific note would be beneficial

2) If position is created in development system and system generates a ID number for it and required config. is done in MM for PR approval process (tcode OLME) in dev. system. And as next step if these changes are transported to quality system or PRD system .

          - Will a new number for position ID be generated based on the number range availability in corresponding system (Qlty or PRD). ?

         -  If there a new number is generated then must it be linked to MM config. again in OLME tcode ? in corresponding systems.

 

Referred links:

https://scn.sap.com/thread/423160 - speaks about treating as master data

http://scn.sap.com/thread/166476- speaks about internal numbers in each system work flow issue
https://scn.sap.com/thread/3242181 -speak about the issue of transporting.

 

A note is available but not any details specific to above issue.

Note 2188451 - ME875:Agent ID release strategy workflow, can be bench marked with respect Agent ID availability in system or not and should be maintained according.



Thank you for time,

Eshwar


↧
Search
↧

Re: SAP Business One 9.2 PL03

June 14, 2016, 3:31 pm
$
0
0

Hi,

 

Please refer  2239782 - Overview Note for SAP Business One 9.2 PL03 for more information.

 

Thanks

↧

Re: Powerbuilder Ultimate Suite by WerySoft

June 14, 2016, 3:33 pm
$
0
0

The next release of PBUS will be 100% user objects and PowerScript (although PBNI is still considered part of PB). I'm not sure how much more "PowerBuilder" it can get.

 

I'm just wrapping up development on a new status bar for the Ribbon Window. More cool features to come.

 

pbus.png

↧

SAP PO Rest Polling - HTTP URL

June 14, 2016, 4:51 pm
$
0
0

Hi All,

 

I had below queries on the REST Polling adapter :

 

1. How do you view the runtime target HTTP URL, do you see in audit logs, I didn't find that. So if I use {IncrementalToken} with Last datetimestamp, I would like to see what value gets replaced in the token each time the interface runs. If the call errors out I can see the error URL but not when it is a success I can't see the URL

 

Is there any logs we need to switch on to see this values ?

 

 

Regards

Ravijeet

↧

Re: KE30 -Saved data Varaint

June 15, 2016, 3:28 pm
$
0
0

Hi Ram,

 

When you execute the KE30 report again for same variant, you will get an option of displaying its last frozen data. You can not save more than one version for same selections (same variant), it always asks you to overwrite previous frozen data. That way you only have one version of saved data.

 

Thanks,

Srinath

↧
↧

Re: Change Payment Terms Config

June 15, 2016, 3:31 pm
$
0
0

Hi Susan,

 

First, why not to replace old PT by new PT in custom code? Seems fairly easy. Find all places where it’s in use with some search tool like program RS_ABAP_SOURCE_SCAN. Replace where needed.

 

Second, if you absolutely want to stick with old PT then be ready to deal with  side-effects i.e. open items containing old PT (you might want to change baseline date massively) and calculations such us Net due date in FBLxN not working properly anymore for some items or accounts. Not sure how APP and standard evaluations might react as well.

 

Best regards,

Anton

↧

Re: Trigger mail to vendor's company correspondence email for debit memos

June 15, 2016, 3:33 pm
$
0
0

Hi Pushpraj,

  Did you ever get an answer to this?

Thanks

↧

Re: How to pass an Array of Objects from SAP UI5 Controller to Jersey Web Service?

June 15, 2016, 3:35 pm
↧
Search

Re: Change subject on task email for event GOING_TO_EXPIRE in SRM contract

June 15, 2016, 3:36 pm
↧
↧

Google calendar integration with C4C (Management Appointment)

June 15, 2016, 3:37 pm
$
0
0

Hi guys,


I was assigned to make use Google Calendar API for creating C4C "Appointments" , "Tasks" and " Views ".

I was finding out about it and I found the tutorial google .NET . But I did not find anything related to Cloud Studio.

Please I need your help, as I suggested using Java, but not how .

Could give me some information about it , or if a page that has a tutorial on how to achieve the connection of the Google Calendar API and C4C (Cloud Studio) .


Thank you,

Fredy .

↧

Re: Monthly Sales Employee Analysis

June 15, 2016, 2:05 pm
$
0
0

I added T0.GrosProfit to the query and it shows up, but it is not showing when there should be a negative dollar amount for Credit Memos.

 

See pic:

 

Capture.JPG

 

Thank you.

 

Larry T.

↧

Re: Restricting Views(?) When Using HANA HTTP Connection and Analysis for Office 2.2

June 15, 2016, 1:15 pm
$
0
0

Hi Mel,

If you don't mind can you please share a sample of the role you created.

 

Thanks

AJ

↧

Re: Assign RFx transaction type to hierarchy template

June 15, 2016, 3:44 pm
↧
↧

Re: How to store the picture of body with selected joint

June 16, 2016, 3:32 pm
$
0
0

Hi Lars

Can you explain more ??

How can i paint the circle?

how can i modify the color  when user click it?

how can to determine which circle the user choose??

 

is there any demo example for similar approach?

 

Regards Ahmed

↧

Triggering SAMPLE_PROCESS_00002310

June 16, 2016, 3:35 pm
$
0
0

Hi,

I am trying to modify a copy of SAMPLE_PROCESS_00002310 in order to send a SapScript invoice from Tran MR90 through email. I need to change the email address from the standard KNB1-INAD to LFB1-INAD. I have coded the FM and put in a hard break-point. However wehn we run transaction MR90 the FM ZPROCESS_00002310 is not being called. We activated BTE 2310 and also attached the z fm. what else is required to trigger the FM?

 

I also activated enhancement RFKORIEX include  ZXFKOU01 but that code is also not being triggered?

Thanks,

Jim

↧
Search

Rules to transfer project costs to an asset under construction before assignment

June 16, 2016, 3:44 pm
$
0
0

Hi experts.

 

Actually i´m accumulating costs from projects tasks to assets under construction, and i´ve done both next flows:

 

1. I created a PO assigned to the project task after have assigned an asset under construction to his task, and the cost was succesfully acumulated in the asset under construction.

 

2. I created a PO assigned to the project task before have assigned an asset under construction to his task, and the cost was not succesfully acumulated in the asset under construction. So i created a Settlement Run from Project Tasks, indicating the task i want to accumulate in the AuC, but did´nt obtained what i expected.

 

Does anyone knows what am i doing wrong?

 

Hope for you to help me.

 

Best regards.

↧

Re: Inventario histórico con su precio promedio en determinada fecha

June 16, 2016, 3:48 pm
$
0
0

Gracias Luis, probare tu codigo.

↧
↧

Org Structure not copied during tenant copy (solution profile)

June 16, 2016, 3:49 pm
$
0
0

Hi all,

 

We copied a tenant to another tenant (including configuration but not transactional data). When we went into the new tenant, we noticed the Org Structure was missing.

 

Rather, it was pointed out that the Org Structure had to be imported using the migration tool.

 

However, when I went to import the Org Structure, I noticed that it also tried to map the employee mapping f(including the employee IDs) from the source tenant to the new tenant. But since we didn't migrate the employee data and the load of employees into the new tenant was 'fresh', the employee IDs wouldn't match!

 

Is this a normal behavior when copying a tenant? Now I am left with a new tenant, new employees but no original Org Structure - so nobody is assigned to an org node!? Help!?

 

Do I need to manually recreate the org structure and then re-map the new employees to the org nodes?

 

Thanks in advance!

↧

Moving Webform App to Appeon (12.5/2015)

June 16, 2016, 3:49 pm
$
0
0

Greeting all,

 

I would like to convert an existing webform based reporting application to Appeon.

 

I have had it running for several years and it works fine except for the fact that we are upgrading our browsers to IE 11, so I have to attend to this.

 

The code below shows that I am using MapVirtualPath to keep track of where I am saving the file for each user in their session directory.

 

How does this work in Appeon?  Do I do a simple SAVEAS and Appeon automatically keeps track of where the file is so I can add it as an attachment?

 

Also, am I prevented from using DOTNET code to send the email and must I use Roland's code (not that I have a problem with it, Roland    ) or can I continue to deploy system.dll and keep this code in place?

 

Also, are there other advantages where maybe now in Appeon, I can saveas excel and not lose my calculated fields (which I hate) and not have to save the file as HTML?

 

Can I offer up a download dialogue so the user can simply click to save the document on their desktop?

 

Thanks all!!

 

Paul

 

 

string user

user = left(email, (pos(email, "@")-1))

 

string filename

string filepathname

 

#if defined PBWEBFORM then

 

  filepathname = MapVirtualPath("c:\OnDemand Comp 1-3 Report For-" + account + ".xls")

 

  filename = "c:\OnDemand Comp 1-3 Report For-" + account + ".xls"

 

  long returncode

 

  returncode = dw_2.saveas(filename,HTMLTable! ,true)

 

  if returncode = 1 then

 

  string ToAddress2

  ToAddress2 = email

 

  string bodytext

  bodytext = 'Dear Valued XXX Customer, ' + '~r~n' + '~r~n' + 'Please find attached the requested trip report in Microsoft Excel format.' + '~r~n' + '~r~n' + 'Thank you,' + '~r~n' + '~r~n' + 'XXX Billing Operations' + '~r~n' + '1-XXX'

 

  string sStartDate

  sStartDate = string(start_date, "MM/DD/YYYY")

  sStartDate = left(sStartDate,2) + "-" + mid(sStartDate,4,2) + "-" + right(sStartDate,4)

 

  string sEndDate

  sEndDate = string(end_date, "MM/DD/YYYY")

  sEndDate = left(sEndDate,2) + "-" + mid(sEndDate,4,2) + "-" + right(sEndDate,4)

 

  string subject

  subject = 'XXX Customer Report for Account ' + account + ' for Dates: ' + sStartDate + " To " + sEndDate

  string fromaddresstext

  fromaddresstext = "billing@xxx.com"

 

// #if defined PBWEBFORM then

  System.Net.mail.MailMessage message

  message = create  System.Net.mail.MailMessage

  message.subject = subject

  message.body = bodytext

 

  System.Net.Mail.MailAddress fromaddress

  fromaddress = create System.Net.Mail.MailAddress("billing@xxx.com", "XXX Billing Operations")

  message.From = fromAddress

 

  System.Net.Mail.MailAddress toaddress

  message.To.Add(email);

 

  System.Net.Mail.Attachment attach

  attach = create System.Net.Mail.Attachment(filepathname,"application/xls")

  Helper.Mail.AddAttachment(message, attach);

 

  System.Net.Mail.SmtpClient smtpclient

  smtpclient = create  System.Net.Mail.SmtpClient

  smtpclient.host = "webapp3.ftl.com"

  smtpclient.port = 25

  smtpclient.send(message) 

 

  mle_1.show()

  mle_1.text = "The Excel Export was sent to " + email

 

  cb_email_report.hide()

  cb_get_data.show()

 

  else

  mle_1.show()

  mle_1.text = "Sorry, there was a problem generating the file."

 

  end if

 

#end if

↧

Data retrieval

June 16, 2016, 3:51 pm
$
0
0

Hi

 

I have a flatfile datasource that includes just no. of employee, month and year.

This datasourse represents the employees that took a certain training.

I want when i load the datasource it automatically get the rest of the master data of those employees (with the emp no in the file)

like PA position ,,,, based on the emp id from the flat file

 

 

any advice please?

↧
Viewing all 8713 articles
Browse latest View live
More Pages to Explore .....
Search

Latest Images

New $4.5 million East Bay trail path will connect bicyclists, pedestrians to...

New $4.5 million East Bay trail path will connect bicyclists, pedestrians to...

April 18, 2024, 11:05 am
Photographer Gifts for Clients / Print Packaging / 4x6 Photo Box by...

Photographer Gifts for Clients / Print Packaging / 4x6 Photo Box by...

April 17, 2024, 6:48 pm
Deepfake Video of Aamir Khan circulates Online

Deepfake Video of Aamir Khan circulates Online

April 17, 2024, 3:07 am
Very Hungry Caterpillar™ Shirt: World of Eric Carle™+ Little Goodall by...

Very Hungry Caterpillar™ Shirt: World of Eric Carle™+ Little Goodall by...

April 14, 2024, 8:14 am
Have you seen Michael Wines? Burien man has been missing since Saturday,...

Have you seen Michael Wines? Burien man has been missing since Saturday,...

April 12, 2024, 3:59 pm
Stay Salty POTS Awareness Stretchy Stacking Bracelets | Set of Three|...

Stay Salty POTS Awareness Stretchy Stacking Bracelets | Set of Three|...

April 11, 2024, 5:27 pm
19 Reader-Favourite March Purchases — From Steals To Splurges

19 Reader-Favourite March Purchases — From Steals To Splurges

April 11, 2024, 5:07 am
Fake lip ring, silver lip ring, simple lip ring, unisex lip ring by AIRlab

Fake lip ring, silver lip ring, simple lip ring, unisex lip ring by AIRlab

April 9, 2024, 4:00 pm
People's Blog • First Pictures of the Eclipse ! ! !

People's Blog • First Pictures of the Eclipse ! ! !

April 8, 2024, 1:08 pm
First Pictures of the Eclipse ! ! !

First Pictures of the Eclipse ! ! !

April 8, 2024, 1:08 pm