Hello
when I used ztable in rso2 for buliding datasource ,my psa is empty but with standard table evrything is ok.
I check sm58 and it is empty!!!!!!
plz help me
Hello
when I used ztable in rso2 for buliding datasource ,my psa is empty but with standard table evrything is ok.
I check sm58 and it is empty!!!!!!
plz help me
You cannot include source list information into the document overview. You might need to maintain this block in the contract itself (ME32K > Edit > block), so that you can include this info into the selection.
Or you switch to the usual way of source assignment: ME57.
ME21N is named "create purchase order vendor known", which actually excludes a source determination.
Hi Jessica,
The person who creates the AR normally is the same person who can estimate the cost. If the cost drives the number of approvers, then the correct AR type can be selected at the very beginning.
As a second option you can approach it not from the system, but from the process side. You can identify a role of AR adimistrator who is responsible for AR master data maintenance and know (at least) a number of approvers.
Number of approvers is a key thing when AR is created. In terms who they are exactly, that can be determined at a later stage. You can design a process step (maybe user status) to identify all business approvers before starting the standard workflow.
The custom workflow on the other hand has no limitations, basically any approver can define who is next, but I would doubt such approach from SoD point of view.
Regards,
Hi Manu,
20.01.2015 | 03:00:47 | Chain DT_541_PC_ALL was removed from scheduling |
Check the Chain DT_541_PC_ALL, its showing its removed from scheduling.Go to that chain and drill down to the end of the chain if its a part of some other local chains. Make sure that Chain DT_541_PC_ALL was in active mode and scheduled options are fine.
Regards,
Babu.
Dear Experts,
Got it. I have changed the PC 5 to 0 instead of 9.
Regards
Ravi kumar
Hi Mansoureh,
Check if you can run MD02 for a single SKU.. if it can be done without any problem, then you will need to find which is the materials that is causing the error. For this you will need to debug MD01.. One option could be to put a breakpoint for the error message and then find the material.
It could be a problem in a calendar, with the production times, lot sizes, etc..
Kind Regards,
Mariano
Hi Dioso,
Which data type did you use to read time field from FM TEXT_CONVERT_XLS_TO_SAP?
You have to select a real data file for validation!
Just perform the following test:
Use exactly this data file:
ID;EVDESCRIPTION;PAR2;PAR3;PAR4;SCALING
ASHAN;Ashan;MAGAZ1;BIG;ALL;Y
METRO;METRO;MAGAZ2;MIDDLE;MOSCOW;Y
GLOBUS;Globus;MAGAZ3;BIG;CENTER;Y
SCALING - can be Y or N, not a numeric!
Then use the following transformation file:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ;
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
*CONVERSION
Validate it and import data! 100% success
Vadim
Hi
Create one more condition table by removing "Region"
assign the condition table in access sequence.
now we can see the two key combinations in VK11 with region and without region.
as per your requirement you can maintain condition records by selecting the correct combination (with region or without region)
Thanks,
Anil.G
1) Create new data file .csv
2) Upload it
3) Create new transformation with proper mapping
4) Validate transformation file with data (uploaded in server )
5) Share the log
6) Run DMP import master data from flat file.
7) Share the log
Shrikant
Hi Murthy,
Try substitution by writing a small piece of code.. To check for the WC work Center CC and then find the PC for the CC and substitute it to the WBS..
Regards
Sammar
Thank for Help. It´s possible you can create a universum with ER-Tables. You must take the SAP Java Connector. But there is only one problem, you can not change all dimensions and measures can be seen in Webi only as dimensions of the data types in Webi document.
Regards Jens
Hi Shirkant
Yes they are
Hi
If everything would be done by me than why do companies hire ABAPERs? Logic building is ABAPERs job. You just need to tell him requirement and tell him the field and table names etc. You have to tell him in functional language what you have told us in your initial post. If you ABAPER is smart he would be able to convert that in SAP language.
Thank$
Bom dia Jaqueline, Creio que como você quer mesmo que saia na nota fiscal coloque base de calculo 100%, afinal você quer que saia na nota fiscal. (No final vai sair uma nota fiscal normal, lembrando que contabilmente vai abater da receita também, tendo que fazer estorno depois como você já falou que o contador ira fazer) Ou como falou o Everton muda o calculo , fazendo com que a base outras seja utilizada para o calculo do ICMS, mais provavelmente assim não vai sair a base de calculo na nota, tendo que alterar isto também. Um abraço, Jean
Dear MM Gurus,
I have configured STO SLoc to SLoc for 129 plants and 987 SLocs.
Now I have to do testing of all 987 SLocs but problem is that it is taking hell lot of time for Testing STO.
My requirement is whether is it possible to enable those values only in issuing SLoc field in STO for which i did configuration?
For example Following SLocs have been assigned to Plant 2000
0001
0002
0003
1000
1001
4000
6000
6008
6999
8888
9999
Now I did STO configuration for following SLoc's only: Assign Delivery Type and Checking Rule According to Storage Location & Define Shipping Data for Stock Transfers Between Storage Locations
0001
0002
0003
1000
9999
So is it possible to popoulate the above fields only(when pressed F4) while creating STO in issuing SLoc field currently it displys all SLocs which are maintained for Plant 2000.
Kindly help. <removed by moderator> .
Regards,
AJ
Message was edited by: Jürgen L
Tevfik,
Each Afaria server that has all components should have 3 RSOE. One for the server, one for package server and one for enrollment server. If you have installed the enrollment server on this slave, then yes this needs an RSOE. Generally speaking you can copy the RSOE configs from your master server over to the slave, and just edit them so that the connection goes to the local slave server, not the master. Does this make sense?
Hi All,
Thanks for ur replies.
We can achieve the same using customisation without enhancing webdynpro.
Extensions & field control->configure generic field display on user interface.
So am closing the thread.
Thanks
Jixon
The screenshots don't show a directory not found error. They appear appear to show you trying to invoke isql from within another isql session. You need to invoke isql from an OS prompt, not from an isql prompt.
Any "directory not found" error is likely due to the script having directory names coded within it that do not match your own system.
I note that you say you put the script in /sybase/DBI/backups, but then try to reference the script from an entirely different directory with -I /backup/sp_dumpdb.sql.
-bret