Hi Florian,
Few questions..
1) Where is PPM addon in installed..ERP or Solution Manager?
2) Are you trying to integrate PPM with Solution manager?
You can have a look at the below links also.
PPM Projects integration with Change Request Management in SP10
The Beginer's Guide to Integrating PPM with ChaRM in SP10
Regards,
Ravi
p.s. if you really really want to use your existing code, then look into using the split() function in conjunction with the @ separator. i.e. split(var, '@')[2]
you still need to use two summaries in the crosstab in order for this to work though. first summary splits the var with [1] and the second summary gets the [2] of the split.
however, you may also need to add extra coding checking the ubound() of the split first. again, using two sets of formulas with the second summary is easier.
Wagner,
Recebo a seguinte mensagem ao criar o documento de marketing...
"Could not commit transaction: Error -1 detected during transaction 'Contas contábeis' (OACT)"
Não achei referência nenhuma sobre esse erro...
o que pode ser?
Usei a seguinte query que me passou... não consegui enxergar direito no print....
Declare
SELECT @Balance = T0.[Balance] FROM OCRD T0 WHERE T0.[Cardcode] = $[$4.0.0]
If @Balance > 0
Begin
Selec Distinct 'True' from OCRD
where OCRD.CardCode = $[$4.0.0]
And OCRD.CardType = 'C'
And OCRD.Balance > 0
End
Else
Begin
Select Distinct 'False'
End
Hola Iván,
Aunque no se cuales TN están restringidos (Si lo llegas a saber agradezco me lo pases), a continuación te dejo un link de un manual de TN, no antes sin recomendarte el cuidado con los mismos ya que por mas simples que puedan parecer te pueden generar dolores de cabeza; a mi me sucedió con un SP muy simple para bloqueos de almacén y me paro toda la empresa hasta que no me ayudaron directamente de SAP y me indicaron que esa era la causa de mis problemas.
Saludos cordiales,
Iván Fernando Vanegas
I am also surprised. But i have try to do that with new application with crystal reports and that was working fine. So i think that it's may be problem with some file and i start try some assumption and finally once i delete Global.asax all started working. Now i have to figure out how i use Global.asax back in application as it's necessary for URL Routing. 
Thanks for your help and reply.
Hi Techies,
I am performing Migration fro HP-UX to RHEL using Distribution Monitor.
Our database is of 10TB when performing the PREPARATION PHASE getting the below error. The failed table is of 1.8 TB.
Could you please adivce how to re-execute the particular table successfully.
ERROR: 2014-06-21 11:32:07 com.sap.inst.distmon.TableSplitTool run
Execution of 'Table splitter' failed.
Reason: 'java.lang.Exception: R3ta -f /export/SapMigration/DISTMON/DEEP/COMMON/PkgSplit/ZMD_TRXXX.STR -table ZMD_TRXXXX%80 -o /export/SapMigration/DISTMON/DEEP/COMMON/R3ta/ZMD_TRXXXX.WHR -check_utf8 -l tableSplitter.ZMD_TRXXXX.log failed with return code 1'.
Please check 'tableSplitter.ZMD_TRXXXX.log'.
ERROR: 2014-06-21 11:32:07 com.sap.inst.distmon.TableSplitTool run
Call stack:
com.sap.inst.distmon.DistMonUtil.startProcess(Unknown Source)
com.sap.inst.distmon.DistMonUtil.startProcess(Unknown Source)
com.sap.inst.distmon.TableSplitTool.runImpl(Unknown Source)
com.sap.inst.distmon.DistMonTool.run(Unknown Source)
com.sap.inst.distmon.DistMonToolThread.run(Unknown Source)
java.lang.Thread.run(Thread.java:595)
ERROR: 2014-06-21 11:32:07 com.sap.inst.distmon.DistributionMonitor Preparation -> Parallel table splitting -> Thread Table splitter ZMD_TRXXXX -> Table splitter
Distmon thread Table splitter ZMD_TRXXXX stopped in operation:
Preparation -> Parallel table splitting -> Thread Table splitter ZMD_TRXXXX -> Table splitter
1 errors and 0 warnings occured
Please check: distribution_monitor_prepare.log
Please check: tableSplitter.ZMD_TRXXXX.log
INFO: 2014-06-21 11:32:07
Execution of 'Table splitter ZMD_INVDETL_0016' started with: 'R3ta -f /export/SapMigration/DISTMON/DEEP/COMMON/PkgSplit/ZMD_INVDETL_0016.STR -table ZMD_INVDETL_0016%80 -o /export/SapMigration/DISTMON/DEEP/COMMON/R3ta/ZMD_INVDETL_0016.WHR -check_utf8 -l tableSplitter.ZMD_INVDETL_0016.log '.
Regards,
Sandeep Singh
Dear Expert,
I am getting error message as below
ME193 G/L Account with Currency EUR not allowed in case of valuated GR
Actually the user who created cart is for Hong Kong but the total value it is showing as 900 USD....
Can any one of you help me in this case..
Please help me.. Thanks in advance...
Hi - I try to activate the PALDEMO as described in the HANA Course. Unfortunately I receive repository error:
Repository operation failed
Repository request failed. Cause: Repository: User is not authorized to execute specified operation;User 'DEV_CW0OSFUUNU08JUGZVRSPMZTP3' has no authorization, privilege: 'REPO.MAINTAIN_IMPORTED_PACKAGES', package: 's0001032806trial.mjhana.shine.paldemo'!, code: 40.156, argument:
Repository request failed. Cause: Repository: User is not authorized to execute specified operation;User 'DEV_CW0OSFUUNU08JUGZVRSPMZTP3' has no authorization, privilege: 'REPO.MAINTAIN_IMPORTED_PACKAGES', package: 's0001032806trial.mjhana.shine.paldemo'!, code: 40.156, argument:
Repository request failed. Cause: Repository: User is not authorized to execute specified operation;User 'DEV_CW0OSFUUNU08JUGZVRSPMZTP3' has no authorization, privilege: 'REPO.MAINTAIN_IMPORTED_PACKAGES', package: 's0001032806trial.mjhana.shine.paldemo'!, code: 40.156, argument:
Repository request failed. Cause: Repository: User is not authorized to execute specified operation;User 'DEV_CW0OSFUUNU08JUGZVRSPMZTP3' has no authorization, privilege: 'REPO.MAINTAIN_IMPORTED_PACKAGES', package: 's0001032806trial.mjhana.shine.paldemo'!, code: 40.156, argument:
Repository request failed. Cause: Repository: User is not authorized to execute specified operation;User 'DEV_CW0OSFUUNU08JUGZVRSPMZTP3' has no authorization, privilege: 'REPO.MAINTAIN_IMPORTED_PACKAGES', package: 's0001032806trial.mjhana.shine.paldemo'!, code: 40.156, argument:
I checked the script and video multiple times and I did all steps exactly as described...
Any idea how I can solve this issue?
Thanks, Manfred
I'm converting a small application in C# / .net that runs on several other databases to HANA.
The escaped double quote thing is pretty painful - is there any way to change the default literals from double to single quote on the connection or though the driver or otherwise?
Thanks -- Chad
im having a requirement to refresh the powl query based on function module POWL_QUERY_REFRESH. In this function module exporting parameter i_query_data is to be filled from table POWL_ACT_QUERY-
im having a requirement to refresh the powl query based on function module POWL_QUERY_REFRESH. In this function module exporting parameter i_query_data is to be filled from table POWL_ACT_QUERY-QUERY field. But the thing is in this field the value is in this way '001A4B088F0E1ED394EAE8F77DE01906'. So what it represents. will it be fixed for the specific query or will change.
Hi Vijay,
Could you let us know which precise error you get in the bodcs, the error ID and error number?
Thank you
Best regards - Christophe
Please explain which field and where you try to change it (explain the path you are going)
You probably don't NEED to make that change. Know what I'm saying? ;]
Make sure its an altruistic change to the content, and it should work already.
Hello,
I am not sure if I understand quesition correct.
1. Internal order per ledger - this link might give you some information.
FB50L FI-posting to an internal order
You can report internal orders per cost element (acutal and plan)
2. GL balances per ledger: use F.08 and select ledger, then you have report per ledger
Let me know if this is what you have expected.
all the best Erwin
Hi,
Ask your user to set the defaults for the transaction,
-->Open Transaction MM01, input Industry sector and material type,
Then hit on select views, default the required views, and check the box as follows,
Then input all the org levels and make it as defaults settings, also check the box for org level/profiles only on request
Thus whenever you enter the transaction MM01,then all the default setting will be popped, Please check
Thanks
Thanks for the guidance, following up with OSS.
Hi all ,
We are currently using SAP EHP6.0 with HR Renewal 1.0 , and we are using the addon MSS portal role which contains the Nakisa addon as a free installation , the issue is simply that when we switch to another language - Arabic - all letters are coming mirrored and is not the right order , I have checked the backend configuration tables for organization visualization and the translation there is coming right and perfect but when replicating them into portal the issue happen .
any solution for this ?
You already had it started - see the previous screenshot. Why it couldn't start now - you should check the Eclipse logs and the Server logs.
